Skip to content
ISO 9001:2015 · BIS · QCI-RMCPS

Concrete that
builds Pune.

One of the largest Ready Mixed Concrete producers in Western Maharashtra — two automated batching plants, 300 cum/hr combined capacity, 63 GPS-tracked transit mixers and a dedicated R&D lab. Engineered to IS 269:2015, IS 516:2021 and IS 1199:2018.

M20 to M120 grades 180-min discharge 100% GPS fleet In-house crusher
Kalokhe RMC batching yard — four yellow cement silos, green mixer tower and a Kalokhe RMC transit mixer loading at Talegaon Dabhade
Accredited · Audited · Compliant
  • ISO 9001:2015 certified ISO 9001:2015
  • BIS certified BIS · RMCPWRO1
  • QCI RMCPS certified QCI · RMCPS
  • Kalokhe RMC Established 2017
0 PLANTS
300 cum/hr combined capacity
0 MIXERS
63 transit mixers · 45 × 10 cum
0 PUMPS
4 boom placers · 10 moly pumps · 1 HD-1408
0 % GPS
Real-time fleet tracking
Why Kalokhe RMC

Built for scale. Engineered for spec.

Two decades of aggregate expertise, a decade of ready-mix operations, and a fleet built to deliver on the largest sites in Pune — without compromising on slump retention or finish quality.

63 transit mixers

Pune's largest fleet — 45 × 10 cum drums and dedicated trailer units — all GPS-tracked and dispatch-optimised.

14 concrete pumps

4 boom placers up to 47 m reach, 10 moly pumps and the latest 1408 HD Super High Power — place concrete anywhere on site.

2 automated plants

Schwing-Stetter batching with 150 cum/hr per plant. Dedicated silos for OPC, PPC and Silica Fume.

In-house R&D lab

Compression testing, RCPT, water penetration and full IS 516:2021 protocols. Every batch traceable.

300 TPH stone crusher

Three-stage vertical & horizontal crushing — consistent 20 mm, 10 mm and M-sand gradation, batch-tested daily.

MPCB certified

Six years of continuous MPCB consent, water-recycle basins, dust suppression and reclaim aggregate loops.

Concrete Portfolio

Standard grades to special concrete

From M20 to M120 and beyond — including self-compacting, pervious, fibre-reinforced, lightweight and temperature-controlled mixes. Every mix designed in-house and verified on site.

M20 — M60

Standard RMC

IS 269:2015 OPC with SNF admixture. Slump 100–150 mm, ±25 mm tolerance. For slabs, beams, columns and foundations.

M70 — M120

High Performance

Silica-fume and PC-based. Low w/c, 90-day strength audits. For high-rise columns and long-span beams.

SelfCON

Self-Compacting

Flow 600–750 mm, ±80 mm tolerance. Dense reinforcement zones, no vibration needed.

NatureCON

Pervious Concrete

15–25% voids for storm-water management. Pavements, driveways, low-impact parking.

TempCON

Temperature Controlled

Chilled water + ice dosing. Pour temperature ≤ 22°C for mass pours and dam-grade structures.

FiberCON

Fibre-Reinforced

Polypropylene / steel fibre blends. Crack-control slabs, industrial floors, shotcrete.

LightCON

Lightweight

Density 1.4–1.8 g/cc. Lightweight aggregate + foam. Roof screeds and insulation layers.

ImpriCON

Decorative Concrete

Pigmented, polished, stamped. Architectural finishes without stone cladding.

Quality is a loop, not a checklist

Sample → Test → Certify → Deliver

Every batch is sampled at discharge, cube-cast on site, compression-tested at 7 and 28 days, and traceable through a digital logbook. Our R&D lab runs RCPT, sorptivity and water-penetration tests against IS 516:2021 protocols.

  • Sample every load Slump/flow at site · cube cast at truck chute · temperature logged.
  • Compression-test at 7 & 28 days Digital load-frame with auto-stress rate and audit-trail export.
  • Certify & deliver the logbook Batch card with mix ID, time-stamp, slump and test results — per IS 516:2021.
Quality loop — Sample, Test, Certify, Deliver
Plants & Equipment

Capacity that scales with your site

Two plants in Talegaon Dabhade MIDC, with a fully equipped fleet and an in-house stone crusher feeding consistent aggregate, every shift.

Kalokhe RMC yard at Talegaon Dabhade — fleet of twenty-plus Kalokhe RMC transit mixers lined up beside yellow concrete-pump trucks, with Pune's skyline on the horizon
Talegaon Dabhade MIDC · Pune · 410 507
Asset summary

Everything on one campus

Batching plants Schwing-Stetter twin-shaft
2 × 150 cum/hr
Transit mixers 63 units · 45 × 10 cum drums
63
Concrete pumps Boom placers · moly pumps · 1408 HD
14
Cement silos OPC · PPC · Silica Fume dedicated
3
Admixture storage SNF admixture tanks
48 MT
Chiller plant For temperature-controlled concrete
Online
Stone crusher 3-stage VSI & HSI
300 TPH
01 — AGGREGATE Crush → Bin → Convey

3-stage VSI → 4-compartment bins → inclined belt.

02 — CEMENT Silo → Screw → Weigh

Dedicated OPC, PPC & Silica Fume silos.

03 — BATCH Weigh → Mix → Sample

Twin-shaft mixer with load-cell batcher.

04 — DELIVER Truck → Pump → Place

180-min discharge · GPS · cube at chute.

Sustainability loop — clean power, build, reuse, recycle
Sustainability

Reduce · Reclaim · Recycle · Renew

Concrete is heavy on resources — we work hard to make it lighter on the planet. Six years of MPCB consent, water-recycle basins on site, dust suppression, and 100% reclaim of returned concrete as aggregate.

Water recycle Chiller bleed & wash water reclaimed.
Returned concrete Crushed & reused as fill aggregate.
Dust suppression Mist canons at crusher & bins.
MPCB consent 6+ years · audited annually.
Read our sustainability commitments
From the site office

What project managers say

Six towers, twelve months, zero hold-ups. Kalokhe's dispatch team called before every pour and the slump held from plant to 14th floor — that is rare.

Project Manager High-rise residential · Pune West

The R&D lab generated the mix design for our 50 MPa deck in three days — including silica-fume optimisation and trial pour. We hit target strength at 7 days.

Structural Consultant Bridge deck · MIDC

The GPS updates let us plan crews around truck arrivals. Pump crew, placer crew, finishers — all in sync. Saved us an hour a day on a 3,000 cum pour.

Site Engineer Industrial floor · Chakan

Ready to pour?

Tell us the grade, the volume and the site. We will dispatch within 24 hours.

Submit an inquiry +91 91122 12999